Ultrasonic welding machine does not sound wave causes and solutions -

Causes and Solutions of Unvoiced Wave in Dizo Ultrasonic Wave Welding Machine -

(A)  Ultrasonic Welding Machine does not pronounce the wave solution:
Solving the sudden missed wave method of the ultrasonic welding machine is very simple: just blow the board dry and it can be used normally. Of course, if the damage is serious, then you have to replace another crystal plate. Under normal circumstances, it can be dried with an electric fan. In the use of ultrasonic welding machine ultrasonic welding machine maintenance method is actually very important, if a machine is maintained, the frequency of failure will be relatively reduced.
For more details: Ultrasonic welding machine repair and fault and other issues can be online consultation!
(b) Check the cause of the unvoiced wave of the ultrasonic welding machine:
First: first detect whether the trachea is connected.
Second: Check if there is a good connection between the power supply and the circuit board circuit.
Third: In the end, the weather may change rapidly. If there is too much air, it will cause a resurgence. The floor will be wet and the machine will be wet. It will also cause the moisture in the electronic components to change or conduct the performance of the machine, and the machine will not function properly. Used, malfunctioning. In fact, these are minor problems, and only regular maintenance, clean and dry, it can be, no problem.

(C) Dizo ultrasonic ultrasonic welding mold structure of misunderstanding ultrasonic mold (HORN) a variety of types, the shape of the workpiece determines the shape of the mold, but each part of the size and curvature, material must be strictly calculated, Someone mistakenly believe that only However, it is suitable for a metal block. Whether the design is reasonable has a direct impact on the mold's efficiency, longevity, and product pass rate. In severe cases, it will directly burn out the generator. The material of the mold is generally magnesium aluminum 7075, while some people use lower quality materials or counterfeit 7075 to reduce costs. Regular mold manufacturers have a set of strict inspection procedures for feeding materials. The processing dimensions are processed and simulated by computer software. Quality is guaranteed. These workshops cannot be done by general workshops. If the molds are not designed and manufactured properly, the reaction problems are not obvious when welding small workpieces. When the power is high, there are various drawbacks. Severe direct damage to power components.